OPTIMALISASI KINERJA TRUK QUESTER CWE 370 MELALUI MODIFIKASI SISTEM VESSEL
DOI:
https://doi.org/10.37304/jptm.v6i1.15247Keywords:
Optimization, Quester CWE 370 Truck, VesselAbstract
The Quester CWE 370 truck is one of the most widely used transport vehicles in the industry, where reliability and operational efficiency are critical to ensuring a smooth supply chain. This research aims to optimize truck performance through vessel system modification, which focuses on improving fuel strength and efficiency. The modification process includes checking the raw material, cutting, welding, and smoothing, which is followed by testing to ensure fuel flow stability and better engine response. The results show that vessel system modifications not only improve fuel efficiency, but also extend engine life and reduce the need for routine maintenance. Thus, these modifications provide long-term benefits for the company in terms of operational cost savings and increased productivity.
Downloads
References
Adha, H. R. (2022). Analisis Konsumsi Bahan Bakar Alat Angkut UD QUESTER CWE 370 Dalam Kegiatan Pengangkutan Bijih Nikel Di PIT B PT. Djava Berkah Mineral, Kabupaten Morowali Utara, Provinsi Sulawesi Tengah. Doctoral dissertation, Universitas Pembangunan Nasional" Veteran" Yogyakarta1.
Ali, F. H., Liaqat, F., Azhar, S., & Ali, M. (2021). Exploring the quantity and quality of occupational health and safety disclosure among listed manufacturing companies: Evidence from Pakistan, a lower-middle income country. Safety Science, 143, 105431. doi:10.1016/j.ssci. 2021.10543110.1016/j.ssci.2021.10543
Azrief, I., Zulfadhli, W. A., Mahmudi, D. I., & Gobel, A. P. (2022). Produktivitas Excavator Dan Dump Truck Pada Penambangan Batubara Di PIT 1 Utara Banko Barat PT. Bukit Asam TBK. Jurnal Sumberdaya Bumi Berkelanjutan (Semitan), 1(1), 272-279.
Gusharianto, G. (2022). Strategi Peningkatan Kinerja Bongkar Muat Container Dan Material Loose Cargo Kapal Bg Bayswater 128 Di Pelabuhan Batu Ampar Oleh PT. Persero Batam (Doctoral Dissertation, Politeknik Ilmu Pelayaran Semarang).
Nahangi, M., Chen, Y., McCabe, B. (2019). Safety-based efficiency evaluation of construction sites using data envelopment analysis (DEA). Saf. Sci. 113, 382e388. https://doi. org/10.1016/j.ssci.2018.12.005
Purwoko, Y. P. A., Alfando, Y. A., & Tarigan, E. F. (2023). Menurunkan Waktu Pada Proses Pengisian Grease Bearing Roda Unit Quester Saat Service Rem Di Bengkel Ud Trucks Abc. Technologic, 14(1).
Ramadhani, A. F., Rauf, A., Hariyanto, R., & Lusantono, O. W. (2023). Kajian Produktivas Alat Muat Dan Alat Angkut Berdasarkan Match Factor Dan Teori Antrian Pada Kegiatan Pengangkutan Ore (Eto Efo) Di PT Djava Berkah Mineral Site PT Bumanik, Kabupaten Morowali Utara Sulawesi Tengah. Jurnal Teknologi Pertambangan, 8(2), 27-35.
Rahman, A. (2023). Implementation of a Decision Support System for Selection of Used Motorbikes using the Simple Additive Weighting Method. Journal of Computer Scine and Information Technology, 138-142.
Rosiani, T. Y., Utama, D. M., Ummudiyah, A. Y., & Amallynda, I. (2024). Sustainable Manufacturing Assessment using Sustainable VSM and AHP involving Workload and Machine Efficiency: A Case Study in Indonesian Paving Block Production. Circular Economy and Sustainability, 1-23.
Rusmini, R. (2022). Efforts to Overcome Violations of Article 293 Paragraph (2) of Law Number 22 of 2009 Concerning Traffic and Road Transportation. Discipline: Academic Community Magazine of the Youth Pledge School of Law, 28(3), 109–116.
Saerang, R. B., Ratminah, W. D., Titisariwati, I., & Wahyuningsih, T. (2023). Kajian Teknis Produktivitas Alat Muat Dan Alat Angkut Pada Stockpile Bijih Nikel Di PT. Nusajaya Persadatama Mandiri, Site Matarape Kabupaten Morowali Sulawesi Tengah. Jurnal Teknologi Pertambangan, 8(2), 15-21.
Srinivas, V., Thakur, R. N., Jain, A. K., & Saratchandra Babu, M. (2019). Physicochemical properties and tribological performance of motorbike lubricant dispersed with surface modified WS2 nanoparticles. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233(9), 1379–1388.
Syahadat, M. (2021). Kajian Teknis Produksi Alat Muat Dan Alat Angkut Pada Front Penambangan Bijih Nikel Di PIT B PT Djava Berkah Mineral Site Bumanik, Kabupaten Morowali Utara Sulawesi Tengah (Doctoral Dissertation, Upn" Veteran" Yogyakarta).
Tang, X., Duan, Z., Hu, X., Pu, H., Cao, D., & Lin, X. (2021). Improving ride comfort and fuel economy of connected hybrid electric vehicles based on traffic signals and real road information. IEEE Transactions on Vehicular Technology, 70(4), 3101–3112.Tomak, N., & Polat, T. K. (2022). Risk prioritization model driven by success factor in the light of multicriteria decision making. Open Chemistry, 20(1), 759-776.
Yousif, M. T., Sadullah, A. F. M., & Kassim, K. A. A. (2020). A review of behavioural issues contribution to motorcycle safety. IATSS Research, 44(2), 142–154.