PEMBUATAN PROGRAM CORE PADA CETAKAN PIRING PLASTIK MENGGUNAKAN SOFTWARE MASTERCAM X5
DOI:
https://doi.org/10.37304/jptm.v4i1.5273Abstract
The mold generally consists of two parts, namely the cavity and the core. CAD and CAM are solutions that can meet the needs of cavity and core fabrication. The CAM process is displayed to get a program in the form of a code file which will later be entered into the CNC machine. This study aims to be able to design and plan the process of making cores on plastic plate molds and being able to program core plate molds with software. This research was conducted to determine the process of making core plate molds. To determine the spindle speed and feed speed for each tool, see the cutting speed reference. From all stages of core plate manufacture with MasterCAM software, several machining processes are produced, namely drill, tap, boring, surface roughing, surface semi-finishing, and surface finishing. The total time required to complete all processes is 42 hours 48 minutes 11 seconds.
Downloads
References
Dicky Hari Purnomo. (2020). Jenis-jenis Mold Berdasarkan Produk Jadi. Retrieved December 7, 2022, from https://www.kompasiana.com/dickyharipurnomo/5f648106d541df5efd2de9a5/jenis-jenis-mold-berdasarkan-produk-jadi
In-House Solutions. (n.d.). Mastercam2018 Mill 2d & solids Handbook Volume 1 (Vol. 1). Cambridge.
Kurniawati, M. (2019). The Application of Vdi 2222 Method in the Process of Designing Tools for Assembling the Four Way Entry Pallet. Journal of Science and Application Technology, 2(1), 33–44. https://doi.org/10.35472/281433
Muryanto, M., & Prayitno, D. (2018). Pengaruh Annealing Terhadap Ketangguhan Baja S45C Yang Telah Di-Hardening Dengan Media Pendingin Oli. Seminar Nasional Cendekiawan Ke, 4(0), 487–490.
Nasmi Herlina Sari. (2018). Material Teknik (ke-2). Yogyakarta: CV Budi Utama.
Siregar, R. A., & Rangkuti, A. R. (2018). Pembuatan Cetakan Kotak Sabun Pada Mesin Injection Molding Plastik. Jurnal Rekayasa Material, Manufaktur Dan Energi, 1(1), 57–63. https://doi.org/10.30596/rmme.v1i1.2436
Suharno, S.T., M. T., Budi Harajanto S.T., M. E., Danar Susilo Wijayanto, S.T., M., Herman Saputro, SPd., M.Pd., M. T., & Basori, S.Pd., M. P. (2013). Modul Pendidikan Dan Pelatihan Profesi Guru (PLPG) Pendalaman Materi Teknik Mesin. Surakarta.
www.morsecuttingtools.com. (1863). Morse Cutting Tool. In Morse Cutting Tool (Master Catalog) (p. 241). Retrieved from https://catalogs.morsecuttingtools.com/Master-Catalog/240/
Yudhyadi, Rachmanto, T., & Ramadan, A. D. (2016). Optimasi Parameter Permesinan Terhadap Waktu Proses Pada Pemrograman CNC Milling Dengan Berbasis CAD/CAM, 6(1), 38–50
