ANALISIS OVERALL EQUIPMENT EFFECTIVENESS PADA BARGE LOADING CONVEYOR (BLC) PT MITRA BARITO

Noveriady; Novalisae; Mindo Tiorida Panjaitan

doi:10.37304/jptm.v4i2.8289

Authors

Noveriady Universitas Palangka Raya
Novalisae Universitas Palangka Raya
Mindo Tiorida Panjaitan Universitas Palangka Raya

DOI:

https://doi.org/10.37304/jptm.v4i2.8289

Keywords:

Barge Loading Conveyor, Overall Equipment Effectiveness, Six Big Losses

Abstract

A barge loading conveyor (BLC) is the main means of transporting coal (material handling) from the stockpile to the barge. Disruption of the conveyor which is driven by an electric motor results in the cessation of the coal shipping process, so performance and efficiency in its use must be ensured. The purpose of this research is to see the value of overall equipment effectiveness (OEE) on PT Mitra Barito barge loading conveyor (BLC), which will later be used as a basis for corrective actions and efforts to increase productivity. The method used in this research is a quantitative method where at this stage the value of overall equipment effectiveness (OEE) is calculated which includes three categories of levels of availability, level of performance, and level of quality. Where in looking at the causes of low OEE seen from the proportion of six major losses. The results showed that the average overall equipment effectiveness (OEE) value of 56.19% was considered ineffective because corrective steps still needed to be taken so that it could inhibit barge loading conveyor (BLC) activities. This is affected by slowdowns, tuning, and adjustments, as well as idling and mining stops with high loss proportion values.

Downloads

Download data is not yet available.

References

Fuadiya, S. L., & Widjajati, E. P. (2022). Analysis of sag mill machine performance using overall equipment effectiveness and failure model and effects analysis method. International Journal of Industrial Optimization, 3(2), 141–153. https://doi.org/10.12928/ijio.v3i2.6701

Hansen, R. C. (2001). Overall equipment effectiveness: a powerful production/maintenance tool for increased profits. Industrial Press Inc.

Ivan WCS, I., Darsin, M., & Ramadhan, M. E. (2020). Aplikasi overall equipment effectiveness (OEE) dalam upaya mengatasi tingginya downtime pada stasiun ketel di PG X Jawa Timur. Multitek Indonesia: Jurnal Ilmiah, 13(2), 95–103. https://journal.umpo.ac.id/index.php/multitek/article/view/1614/1192

Kameiswara, R. A., Sulistyo, A. B., & Gunawan, W. (2018). Analisa Overall Equipment Effectiveness (OEE) Dalam Mengurangi Six Big Losses Pada Cooling Pump Blower Plant PT. Pabrik Baja Terpadu. Jurnal Intent: Jurnal Industri Dan Teknologi Terpadu, 1(1), 67-78.

Marwah, W., Widyaningrum, D., & Sc, M. (2022). Analisis Efektivitas Pada Conveyor Continuous Ship Unloader I ( CSU I ) Dengan Metode Overall Equipment Effectiveness ( OEE ) dan Failure Mode And Effects Analysis ( FMEA ). 3(1), 75–85.

Nakajima, S. (1988). Introduction to TPM: total productive maintenance. Productivity Press. Portland, Oregon.

Pramudito, M. H. (2022). Sistem Pengendali Barge Loading Conveyor Pada Belt Conveyor Pemindah Batu Bara. Power Elektronik: Jurnal Orang Elektro, 11(2), 168-174.

Prasetyoaji, D. K., Abadi, C. S., & Syujak, M. (2019, October). Analisis Efektivitas Coal Crusher Dengan Metode Overall Equipment Effectivenes. In Seminar Nasional Teknik Mesin (Vol. 9, No. 1, pp. 1116-1121).

Priambodo, S., & Mahbubah, N. A. (2021). Implementasi metode overall equipment effectiveness berbasis six big losses guna mengevaluasi efektivitas mesin packing semen. Jurnal Serambi Engineering, 6(4).

Qadafi, M., & Saputra, M. (2022). Analisa Penyebab Kerusakan Dan Perbaikan Pada Belt Conveyor Di PT. Mifa Bersaudara. Jurnal Mahasiswa UTU, 1(1), 19–27.

Sahrupi, S., & Juriantoro, J. (2018). Usulan Penerapan Total Productive Maintenance pada Transfer Conveyor 17A. Jurnal Sistem Dan Manajemen Industri, 2(1), 51. https://doi.org/10.30656/jsmi.v2i1.568

Setiawan, L. (2021). Literature Review of the Application of Total Productive Maintenance (TPM) in various industries in Indonesia. IJIEM - Indonesian Journal of Industrial Engineering and Management, 2(1), 16. https://doi.org/10.22441/ijiem.v2i1.10328

Shafitri, D. O., Larasati, A., & Hajji, A. M. (2022). Peningkatan Nilai Overall Equipment Effectiveness Mesin Stone Crusher Dengan Menggunakan Pendekatan Total Productive Maintenance (Studi Kasus Pt. Brantas Abipraya). Industri Inovatif : Jurnal Teknik Industri, 12(2), 73–87. https://doi.org/10.36040/industri.v12i2.4007

Siagian, D., Gusniar, I. N., & Dirja, I. (2022). Analisis Total Productive Maintenance Dengan Metode OEE dan FMEA pada Mesin Extruder GW-350. Steam Engineering, 4(1), 14-20.

Stamatis, D. H. (2017). The OEE primer: understanding overall equipment effectiveness, reliability, and maintainability. CRC Press.